Free Shipping | Pay in 2/3 or 4 installments

Understanding Error Codes P1105 and P1106: Causes, Symptoms, and Fixes

Understanding Error Codes P1105 and P1106: Causes, Symptoms, and Fixes - iCarsoft-us

Error codes P1105 and P1106 refer to issues related to the manifold absolute pressure (MAP) sensor or barometric pressure sensor. These sensors are crucial for the Engine Control Module (ECM) to monitor and adjust the air-fuel mixture. This article will explore the causes, symptoms, and fixes for these codes, as well as how the iCarsoft CR MAX and CR Eagle can assist in diagnosing and resolving these problems.

p1105-p1106-code-01

"The iCarsoft CR MAX and CR Eagle are powerful diagnostic tools for resolving MAP sensor-related issues."

1. What Do Error Codes P1105 and P1106 Mean?

P1105 and P1106 indicate issues with the manifold absolute pressure (MAP) sensor or barometric pressure sensor. Specifically:

  • P1105: MAP/BARO Circuit Malfunction
  • P1106: MAP/BARO Pressure Sensor Range/Performance Problem

These issues can lead to incorrect air-fuel mixture calculations, affecting engine performance and fuel efficiency.

Code P1105 -P1106 image

2. How Do the MAP and BARO Sensors Work?

The MAP sensor measures the intake manifold pressure, while the barometric pressure (BARO) sensor monitors atmospheric pressure. Both sensors send voltage signals to the ECM, which uses this data to adjust fuel delivery and ignition timing.

3. Common Causes of Error Codes P1105 and P1106

Several factors can trigger these error codes, including:

  • Faulty MAP or BARO sensors
  • Wiring or connector issues (e.g., corrosion, damage, or loose connections)
  • Vacuum leaks in the intake manifold
  • Clogged or dirty MAP sensor
  • ECM malfunction

4. Symptoms of Error Codes P1105 and P1106

When these error codes occur, you may experience the following symptoms:

  • Illuminated Check Engine Light
  • Reduced engine performance
  • Poor fuel efficiency
  • Rough idling or stalling
  • Hesitation during acceleration
P1105 -P1106 Code image

5. Diagnosing P1105 and P1106 with CR MAX and CR Eagle

The iCarsoft CR MAX and CR Eagle provide precise diagnostics for detecting MAP/BARO sensor issues. Follow these steps:

  1. Connect the diagnostic tool to your vehicle's OBD-II port.
  2. Retrieve the error codes to confirm P1105 or P1106.
  3. Use live data monitoring to check MAP and BARO sensor readings.
  4. Inspect the sensors, wiring, and connectors for damage.

p1105-p1106-symptoms

"Symptoms like rough idling and poor fuel efficiency may indicate MAP sensor issues."

6. How to Fix Error Codes P1105 and P1106

Once the cause is identified, take the following steps to resolve these codes:

  • Replace faulty MAP or BARO sensors.
  • Repair or replace damaged wiring or connectors.
  • Fix any vacuum leaks in the intake manifold.
  • Clean the MAP sensor to remove dirt or debris.
  • Reprogram or replace the ECM if necessary.

7. Preventing Error Codes P1105 and P1106

To avoid these issues in the future, follow these maintenance tips:

  • Regularly inspect the MAP and BARO sensors for damage or wear.
  • Clean the MAP sensor periodically to prevent dirt buildup.
  • Perform regular diagnostics with tools like the CR MAX or CR Eagle.

8. Why Use the iCarsoft CR MAX and CR Eagle?

The iCarsoft CR MAX and CR Eagle are advanced diagnostic tools offering live data analysis, system scanning, and error code troubleshooting. They are essential for identifying and resolving issues like P1105 and P1106 efficiently.

ALL SYSTEM FULL OBD2 DIAGNOSIS

"The CR MAX and CR Eagle simplify diagnostics for both professionals and DIY enthusiasts."

Learn More about iCarsoft Products

Leave a comment

Please note: comments must be approved before they are published.